Analysis of perspective materials trends for the oil and gas industry
https://doi.org/10.51890/2587-7399-2022-7-3-136-147
Abstract
Application of the novel materials, which have emerged recently or are even developed for a specific task set, has increased in many industries around the world. At the same time the technical requirements for the materials have increased too. Materials with improved heat resistance, strength, thermal conductivity, wear resistance, etc. are developed, which makes it possible to design more and more advanced products. New materials have evolved from a passive component to an active equipment component, because quite often they provide many potential advantages over usage of traditional materials.
Purpose. The review purpose was to analyze the trends in the area of a novel materials with the identification of the most perspective ones for applying in the oil and gas industry.
Materials and methods. The research methodology was an analysis of publication activity in the world’s largest database Scopus by the relevant thematic requests. As a result of the search, information was obtained on the number of publications on each topic and their distribution by industry. In addition, a publication search was carried out on the applying of all considered materials.
More than 40 types of modern recently-developed materials were analyzed, including various alloys, fibers, carbon materials, coatings, nanostructures, biomaterials, liquids, chemical additives and others. Topics with the highest publication activity during the past 5 years and a significant number of real industry applications were recognized as the most perspective materials for the purposes of a task set.
Conclusions. The main research trends in the area of modern materials are identified as: composites, polymers, smart materials and additive technologies. A description of each type of material presented in the review, its characteristics and main areas of their application are provided.
About the Authors
V. V. Zhukov
Gazpromneft STC LLC
Russian Federation
Russian Federation
Vladislav V. Zhukov — Director of Technological Potential Development
75–79 letter D, Moika river emb., 190000, Saint Petersburg
A. A. Karpov
Gazpromneft STC LLC
Russian Federation
Russian Federation
Aleksey A. Karpov — Leader of Research Organization, PhD
75–79 letter D, Moika river emb., 190000, Saint Petersburg
I. A. Karpov
Gazpromneft STC LLC
Russian Federation
Russian Federation
Igor A. Karpov — Leader of Innovative Technology Programs
75–79 letter D, Moika river emb., 190000, Saint Petersburg
E. M. Koktsinskaya
Gazpromneft STC LLC
Russian Federation
Russian Federation
Elena M. Koktsinskaya — Cand. Sci. (Techn.), Leader of innovations evaluation
SPIN-code: 6051-4096 AuthorID: 539129
75–79 letter D, Moika river emb., 190000, Saint Petersburg
R. R. Khusainov
Gazpromneft STC LLC
Russian Federation
Russian Federation
Radmir R. Khusainov — Cand. Sci. (Techn.), Leader of business analysis
75–79 letter D, Moika river emb., 190000, Saint Petersburg
References
1. Bazhenov S.L., Berlin A.A., Kulkov A.A., Oshmyan V.G. Polymer composite materials: strength and technology. Dolgoprudny: Intellect, 2010. 352 p. (In Russ.)
2. Composite and composite materials — properties and classification of composite materials / PlastExpert — all about plastics and polymers. (In Russ.)] Available at: https://e-plastic.ru/specialistam/composite/kompozicionnye-materialy/ (accessed 2.06.2022).
3. The Seven Ages of Materials. Engineering & Technology, 2019. Available at: https://eandt.theiet.org/content/articles/2019/09/the-seven-age-of-materials/ (accessed 2.06.2022).
4. Polymer matrix composites: properties and applications — matmatch. August 2020. Available at: https://matmatch.com/learn/material/polymer-matrix-composites (accessed 02.06.2022).
5. Zemtsova E.G., Yurchuk D.V., Sidorov Yu.V., Semenov B.N., Morozov N.F., Smirnov V.M. Synthesis of metallic composite based on iron frame and SiC nanostructures and its strength properties. Materials Physics and Mechanics. 2020, vol. 46, no. 1, pp. 122–131. (In Russ.) Available at: https://doi.org/10.18149/MPM.4612020_12
6. Xiaochun Liu, Zheng Liu, Yujing Liu, Zainab Zafar, Yanjin Lu, Xiang Wu, Yue Jiang, Zhiguang Xu, Zhenghua Guo, Shujun Li. Achieving high strength and toughness by engineering 3D artificial nacre-like structures inTi6Al4V-Ti metallic composite, Composites. Part B: Engineering. 2022, no. 230, p. 109552. Available at: https://doi.org/10.1016/j.compositesb.2021.109552
7. Haoren Wang, Rui Kou, Haozhe Yi, Samuel Figueroa, Kenneth S. Vecchio. Mesoscale hetero-deformation induced (HDI) stress in FeAl-based metallic-intermetallic laminate (MIL) composites. Acta Materialia. 2021, no. 213, p. 116949. Available at: https://doi.org/10.1016/j.actamat.2021.116949
8. Pilipović A., Ilinčić P., Petruša J., Domitran Z. Influence of polymer composites and memory foam on energy absorption in vehicle application. Polymers. 2020, vol. 12, no. 6, p. 1222.
9. Oladele I.O., Omotosho T.F., Adediran A.A. Polymer-Based Composites: An Indispensable Material for Present and Future Applications. International Journal of Polymer Science. 2020, pp. 1–12. Available at: https://doi.org/10.1155/2020/8834518
10. Khusiafan F.J. Use of KEVLAR® 49 in aircraft components. Engineering Management Research, 2018, vol. 7, no. 2, pp. 14–19.
11. Karthikeyan R., Srinivasan B. Industrial applications of keratins — a review. Journal of Scientific and Industrial Research, 2014, no. 66, pp. 710–715.
12. «“Strength and safety”: how the project of the composite wing for the new Russian liner MS-21 is being implemented. (In Russ.). Available at: https://www.aex.ru/fdocs/1/2022/3/31/32850/ (accessed 02.06.2022).
13. Oladele I.O., Omotosho T.F., Adediran A.A. Polymer-Based Composites: An Indispensable Material for Present and Future Applications. International Journal of Polymer Science, 2020, pp. 1–12. Available at: https://doi.org/10.1155/2020/8834518
14. Composites in Russian shipbuilding. (In Russ.). Available at: https://www.korabel.ru/news/comments/kompozity_v_rossiyskom_sudostroenii_kakovy_perspektivy.html (accessed 02.06.2022).
15. Petronas. Available at: https://www.iiprd.com/ (accessed 02.06.2022).
16. Maxtube. Available at: https://maxtube.com/company-history/ (accessed 02.06.2022).
17. Reinforced HDPE, PERT, PEX, PA, PVDF, PPS thermoplastic pipes for high pressure pipelines. (In Russ.). Available at: https://sibmashpolymer.ru/information/ (accessed 02.06.2022).
18. Suphangul S., Rokaya D., Kanchanasobhana C., Rungsiyakull P., Chaijareenont P. PEEK Biomaterial in Long-Term Provisional Implant Restorations: A Review. J. Funct. Biomater. 2022, no. 13. — P. 33. Available at: . Available at: https://doi.org/10.3390/jfb13020033
19. Mian S.H., Moiduddin K., Elseufy S.M., Alkhalefah H. Adaptive Mechanism for Designing a Personalized Cranial Implant and Its 3D Printing Using PEEK. Polymers. 2022, no. 14, p. 1266. Available at: https://doi.org/10.3390/polym14061266
20. Rusplast. (In Russ.). Available at: https://www.rusplast.com/ (accessed 02.06.2022).
21. Fremond M., Miyazaki S. Shape Memory Alloys. Springer. 2014.
22. Lei Zh., Wu P. Zwitterionic Skins with a Wide Scope of Customizable Functionalities. ACS Nano. 2018, no. 12, pp. 12860–12868.
23. Chapter 8 — High-temperature engineering thermoplastics: polysulfones, polyimides, polysulfides, polyketones, liquid crystalline polymers, and fluoropolymers plastics in medical devices — properties, requirements, and applications. Plastics Design Library, 2010.
24. Harizi W., Anjoul J., Acosta V. et al. Mechanical behavior of carbon-reinforced thermoplastic sandwich composites with several core types during three-point bending tests. Compos. Struct., 2021.
25. Schonhoff L., Mayinger F., Eichberger M., Reznikov E. 3D printing of dental restorations: Mechanical properties of thermoplastic polymer materials. Biomed. Mater., 2021.
26. Fetouhi L., Petitgas B, Dantras E. Mechanical, dielectric, and physicochemical properties of impregnating resin based on unsaturated polyesterimides. EPJ Applied Physics, 2017.
27. Lienert K. Poly(ester-imide)s for Industrial Use. Beck Elektroisolier-Systeme, 1999.
28. Bont M., Barry C., Johnston S. A review of liquid silicone rubber injection molding: Process variables and process modeling. Polymer Engineering and Science. 2021, vol. 61, no. 7. Available at: https://doi.org/10.1002/pen.25618
29. Zygo M., Lipinska M., Lu Z., MarketaIlcikova M., Bockstaller R., Mosnacek J., Pietrasik J. New type of montmorillonite compatibilizers and their influence on viscoelastic properties of ethylene propylene diene and methyl vinyl silicone rubbers blends. Applied Clay Science. 2019, no. 183, p. 105359. Available at: https://doi.org/10.1016/j.clay.2019.105359
30. Wang M., Yuan Ya., Zhao C., Diao Sh., Duan B. Preparation of fluorosilicone rubber containing perfluorocyclobutyl aryl ether. Polymers for Advanced Technologies (IF3.665), Pub Date: 2020-09-25. Available at: https://doi.org/10.1002/pat.5107
31. Nazarov V.G., Stolyarov V.P., Doronin F.A. et al. Comparison of the influence of some modification methods on the characteristics of ultrahigh molecular weight polyethylene and composites based on it. High Molecular Compounds. Series A, 2019, vol. 61, no. 3, pp. 254–263. (In Russ.)]. Available at: https://doi.org/10.1134/S2308112019030106
32. Sergeeva E.A., Kostina K.D. Methods for obtaining composites and products based on fabric from UHMWPE and rubber for the production of fuel tanks. Bulletin of the Kazan Technological University. 2014, vol. 17, no. 5, pp. 101–105. (In Russ.)
33. Gautam Y.R., Singh S., Verma M.K. Application of UHMWPE fiber based composite material. ResearchGate. Available at: https://www.researchgate.net/publication/327221940 (accessed 19.04.2022).
34. Valueva M.I., Kolobkov A.S., Malakhovskiy S.S. Ultra-High Molecular Weight Polyethylene: Market, Properties, Applications (Review). (In Russ.)]. Available at: https://doi.org/10.18577/2307-6046-2020-03-49-57
35. Jiayou Quan, Junrong Yu, Yan Wang, Zuming Hu. Oriented shish-kebab like ultra-high molecular weight polyethylene membrane for direct contact membrane distillation. Separation and Purification Technology. 2022, no. 290, p. 120847. Available at: https://doi.org/10.1016/j.seppur.2022.120847
36. Kopylov V.M. Organic silicone compounds. Great Russian Encyclopedia, 2010, vol. 15, p. 686. (In Russ.)
37. Kakhramanov N.T. State of the problem of obtaining, research and application of organosilicon polymers /V.M. Kopylov, R. V. Gurbanova, Yu. N. Kakhramanly. Chemical Sciences. Eurasian Union of Scientists (ESU). 2016, no. 6 (27), pp. 112–118. (In Russ.)
38. Banea M.D., da Silva L.F., Campilho R.D. Effect of Temperature on Tensile Strength and Mode I Fracture Toughness of a High Temperature Epoxy Adhesive. Journal of Adhesion Science and Technology, 2012.
39. Marques E.A., da Silva L.F., Banea M.D., Carbas R.J. Adhesive Joints for Low and High-Temperature Use. The Journal of Adhesion, 2015.
40. Wanga J., Guo Q. The preparation and performance of high-temperature adhesives for graphite bonding. International Journal of Adhesion and Adhesives, 2005.
41. High temperature ceramic adhesive. Available at: https://www.final-materials.com/gb/232-high-temperature-ceramicadhesive (accessed 02.06.2022).
42. Film bismaleimide adhesive АМ250. (In Russ.). Available at: https://www.itecma.ru (accessed 27.05.2022).
43. Koktsinskaya E.M. “Smart” materials and their application (review). Videonauka: network journal. 2016. № 1 (1). (In Russ.). Available at: https://videonauka.ru/stati/13-tekhnicheskie-nauki/42-umnye-materialy-i-ikh-primenenie-obzor (accessed 27.05.2022).
44. Sitnikov N.N., Khabibullina I.A., Mashchenko V.I. Self-Healing Materials: An Overview of Self-Healing Mechanisms and Their Applications. Videonauka: network journal. 2018, no. 1 (9). (In Russ.)]. Available at: https://videonauka.ru/stati/19-materialovedenie/186-samovosstanavlivayushchiesya-materialy-obzor-mekhanizmov-samovosstanovleniya-i-ikh-primenenij (accessed 27.05.2022).
45. Osovskaya I.I., Litvinov M.Yu., Vasilyeva A.P. Polymer technology. Application and processing. Self-healing coatings: textbook. St. Petersburg: Higher School of Economics SPbGUPTD. 2020. 80 p. (In Russ.)
46. Stoye D. Paints, coatings and solvents / per. from English. ed. E.F. Itsko. / D. Stoye. St. Petersburg: Profession, 2007. 528 p. (In Russ.)
47. Golubev A.V., Luzgina A.S., Voronchikhin V.D. Corrosion of technological equipment and pipelines in the conditions of the Far North and equivalent territories. Polymer and composite materials in the conditions of the North: Materials of Vseross. scientific and practical. conf. with international participation, October 12–15, 2021. Yakutsk: IPOG SB RAS, 2021. (In Russ.)
48. Self-lubricating antifriction materials. Handbook of a chemist 21. Chemistry and chemical technology. (In Russ.)]. Available at: https://www.chem21.info/info/808309/?ysclid=l3vnwiliuh (accessed 31.05.2022).
49. Self-cleaning coatings will be used in shipbuilding. Available at: https://www.lkmportal.com/news/2014-08-25/9971 (accessed 31.05.2022)].
50. Coating Balconano. (In Russ.). Available at: https://www.oknamedia.ru/novosti/ (accessed 31.05.2022).
51. Self-cleaning coatings. (In Russ.). Available at: https://lakokraska-ya.ru/blog/samoochischayuschiesya-pokrytiya-mechta-stroitelei (accessed 31.05.2022).
52. Shilova O., Tsvetkova I. Synthesis and study of superhydrophobic, anti-icing hybrid coatings. Innovative transport systems and technologies. 2015, pp. 91–98. (In Russ.).
53. Blednova J. Stepanenko M. The role of Shape Memory Alloys in Modern Mechanical Engineering. Scientific and Educational Course, 2012. (In Russ.)
54. Couplings A., Druker V., Perotti A., Esquivel I., Malarria J. Design of Devices and Manufacturing of Fe-Mn-Si Shape Memory Alloy. Procedia Materials Science. 2015, pp. 878–885.
55. Pan M., Zhang X., Zhou D., Misra R., Chen P. Fe–Mn–Si–Cr–Ni Based Shape Memory Alloy: Thermal And Stress-Induced Martensite Materials. Science And Engineering: A. October 2020, vol. 797, no. 21, p. 140107.
56. Claderaa A., Weberb B., Leinenbachb C., Czaderskib C., Shahverdib M., Motavalli M. Iron-Based Shape Memory Alloys For Civil Engineering Structures. An Overview Construction And Building Materials, 2014, vol. 63, pp. 281–293.
57. Yin H., Qu M., Zhang H., Chan Lim Ye. 3D Printing and Buildings: A Technology Review and Future Outlook Technology. Architecture + Design, 2018, vol. 2 (1). С. 94–111.
58. Tibbits S. 4D printing: Multi-material shape change Archit. Des. 2014, vol. 84, pp. 116–121.
59. Studart A.R., Erb R.M. Bioinspired materials that self-shape through programmed microstructures. Soft Matter, 2014, vol. 10, pp. 1284–1294.
60. Strong weightlessness or airgel. (In Russ.). Available at: https://cyberleninka.ru/article/n/prochnaya-nevesomost-ili-aerogel/viewer (accessed 03.06.2022).
Review
For citations:
Zhukov V.V., Karpov A.A., Karpov I.A., Koktsinskaya E.M., Khusainov R.R. Analysis of perspective materials trends for the oil and gas industry. PROneft. Professionally about Oil. 2022;7(3):136-147. (In Russ.) https://doi.org/10.51890/2587-7399-2022-7-3-136-147
Views:
763
Email this article 